Product Description
Description: Alternating / Sequencing Relay • Alternating / Sequencing Relay • Operating Voltage: 120 VAC • Contact Configuration: 1C SPDT • Contact Current: 10 Amp • Mounting: Surface Mount • Termination: 1/4" Quick Connect Terminals • Lockout Option: No Switch • Features: None
| Product Information |
|
Resources |
| Manufacturer |
Infitec |
| Product Category |
Relay |
| Product Sub Category |
Alternating / Sequencing Relay |
| Series |
TAR Series |
|
|
|
| Product Attribute |
Attribute Value |
| Operating Voltage |
120 VAC |
| Contact Configuration |
1C SPDT |
| Contact Current |
10 Amp |
| Mounting |
Surface Mount |
| Termination |
1/4" Quick Connect Terminals |
| Lockout Option |
No Switch |
| Features |
None |
| Tolerance |
±20% of Nominal |
| Frequency |
50 - 60 Hertz |
| Electrical Life |
Full Load - 100,000 Operations |
| Mechanical Life |
10,000,000 Operations |
| Transient |
±1500 Volts for 150 Microseconds |
| Dielectric Breakdown |
1500 Volts RMS Minimum |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-40°C to +85°C |
| Humidity |
95% Relative, Non-Condensing |
| TAR Series |
| Series Description: Alternating Relay Motor Duplexor |
Series Operation: ALTERNATING RELAY
Upon application of power to the input terminals, nothing happens. When the control switch is closed, nothing happens. When the con- trol switch is opened, the output contact transfers causing LOAD A to de-energize and LOAD B to energize. When the control switch is re-closed, nothing happens. When the control switch is again opened, the output contact reverts to its original position, causing LOAD B to de-energize and LOAD A to re-energize. The system will continue to alternate in this sequence as long as power is applied. If the optional selection switch is set to either LOCK LOAD A or LOCK LOAD B, the corresponding load will be electrically locked ON and the alternating will cease while locked. Reset is accomplished by removal of input power. |
- C/MOS Microcontroller Circuitry
- Small size
- Alternating Function With Lockout Option For Performing Maintenance
- SPDT Relay Output, Rated 10 Amps, 1/4 hp @ 125 VAC
- 24, 120 or 230 VAC Inputs Available
- 1/4" Quick Connect Terminals
- Single Hole Mounting
- Encapsulated to Withstand Harshest Environments
- UL/cUL Recognized
|
